Sitemap
- Home
-
EMC Academy
- EMC and CI 2024
- Video Content
- Subscription
- Books
- EMC Standards, Compliance & Testing
- EMgineering
-
SI, PI & EMC for Products & Equipment
- 2 - EMC in Interconnections - Updated for Jan 2021
- 3 - Filtering for EMC - Updated July 2022
- 4 - Shielding for EMC - Updated Jan 2021
- 5 - EMC techniques for heatsinks - Updated Jan 2021
- 6a - Essential PCB design techniques for cost-effective SI, PI, EMC in 2021
- 7 - Circuit design for EMC - Updated Jan 2021
- 8 - Component selection for EMC - Updated Jan 2021
- 9 - Suppressing electro-mechanical devices - Updated Jan 2021
- 10a - Advanced PCB design techniques for cost-effective SI, PI and EMC in 2022
- 11 - Suppressing Electrostatic Discharge (ESD)
- 12 - Suppressing transients on AC, DC power, signals or data
- 13+14: Suppressing emissions of mains harmonics, voltage fluctuations and flicker
- 15 - Protecting from poor AC (mains) and DC power quality - Updated Jan 2021
- 16 - Integrating wireless modules into products
- 18 - Cost effective uses of close field probing
- Analogue design techniques for S/N (SNR) and immunity to EMI
- EMC Design for Switching Power Converters
- EMC for Systems & Installations
- Management of EMC
- EMI/EMC Risk Management
- Safety
- Continuous Development (CPD)
-
Testimonials
- Gold Mine!
- Testimonials 2023
- 24GHz undersea fibre-optic repeater
- Meritas Education AB
- Book reviews
- Tony Waldron, CADAC, UK
- Ronny Deseine, Barco, Belgium
- Steve Offer, Robert Bosch, Australia
- Testimonials 2021
- Testimonials 2020
- Testimonials 2019
- Testimonials 2018
- Testimonials 2017
- Testimonials 2016
- Testimonials 2013
- Testimonials 2012
- Testimonials 2010
- Testimonials 2009
- Testimonials 2007
- Testimonials 2005
- Testimonials 2004
-
Experts
- The Limit Line
- REN CONSULTANTS
- Forest Gems Ltd
- Laplace Instruments Ltd
- Mach One Design EMC Consulting
- Templetronics
- C-PRAV
- Emvlab Technopark Zurich
- TUV Rheinland (Rail)
- Iran Test & Research center for Auto Parts and Components(ITRAC Co.)
- AA Electro Magnetic Test Laboratory Private Limited
- Arcelik
- Beks kft
- Collins Aerospace
- Dexta Moors ltd
- EMC Consulting
- EMC Training & Consulting
- Eurofins Product Testing Italy
- Flemtek
- Gdynia Maritime University, Gdynia, Poland
- Innerve Power Solutions
- Microwave Vision Group (MVG)
- Millennium Electronics Pty Ltd
- Mixed Signal Systems Limited
- Paxton Access ltd
- SENER
- SGS India Ltd
- Sonatest Ltd
- Sulis Consultants Ltd
- Thank you for your application
- TJS Technical Services Inc.
- Total IA Ltd
- University of RWANDA
- University of Zaragoza
- Cherry Clough Consultants Ltd
- REO (UK) Ltd
-
Banana Skins
-
Banana Skins - Cartoons!
- Boys TV interfered with Aircraft
- Cars 'possessed' in Cornwall!
- Raven's Quarterback interferes with play!
- Did you leave the oven on?
- Lightbulbs and Set Top Boxes
- Low Voltage LED string triggers burglar alarm
- Payroll computer problems
- Pedestrian crossing wipes prepay card!
- When the railway interfered with the Hadron Collider
- Banana Skins Compendium
- Medical Banana Skins
- NEW Banana Skins
- Indexes for the first 855 Banana Skins
- Banana Skins 1 - 95
- Banana Skins 96 - 190
- Banana Skins 191 - 285
- Banana Skins 286 - 380
- Banana Skins 381 - 475
- Banana Skins 476 - 570
- Banana Skins 571 - 665
- Banana Skins 666 - 760
- Banana Skins 761 - 855
- Banana Skins 856 - 890
- Banana Skins 891 - 900
- Banana Skins 901 - 910
-
Banana Skins - Cartoons!
-
EM Sectors
- 1-Day Essential PCB Design and Layout Techniques for SI, PI and EMC in 2023
- 2-Day Essential and Advanced PCB Design and Layout Techniques for SI, PI and EMC in 2023
- Five day course for cost-effective EMC design for electronic products in 2023
- Five day course for Military and Aerospace electronic designers
- Four day course for cost-effective EMC design for electronic products in 2023
- Four day course for Military and Aerospace electronic designers
- Mechanical and Electrical Design for Good, Cost-effective EMC
- The Physical Basis of EM Engineering to help achieve good, cost-effective SI, PI, and EMC - Half-Day course
- Three day course for cost-effective EMC design for electronic products in 2023
- Two day course for cost-effective EMC design for electronic products in 2023
- Getting started with practical EMC and EM Engineering - some useful resources - Updated May 2021
- The Risk Management of Medical Devices Regarding Electromagnetic Disturbances
- How to Manage Risks with regard to Electromagnetic Disturbances - Ottawa 2016
- Non-standardized immunity testing, Ottawa 2016
- Why is the IEEE developing a standard on managing EMI risks, Ottawa 2016
- Design and Mitigation Techniques for EMC for Functional Safety
- Developing Immunity Testing to Cover Intermodulation
- EMC for the Functional Safety of Automobiles Why EMC Testing is Insufficient, and What is Necessary
- EMI and EMC: the present situation, and what the future holds - Wattnow Oct 2018
- ESD and Latch Up Damage, Issues with Si-Ge devices
- IEEE Standards Project P1848: Techniques & Measures to Manage Functional Safety - IWCS 2018
- Including EMC in Risk Assessments
- Opportunities in the Risk Management of EMC
- Skin Effect and Surface Currents
- Specifying Lifecycle Electromagnetic and Physical Environments to Help Design and Test for EMC for Functional Safety
- Specifying the EMC performance of a final product
- Summary of low-frequency magnetic field tests on a range of medical and research instruments
- Techniques and Measures to Manage Functional Safety IEEE GEMCCON 2018
- Testing for immunity to simultaneous disturbances and similar issues for risk managing EMC
- The New EU Directives which came into force in 2016
- Validation, Verification and Immunity Testing Techniques for EMC for Functional Safety
- Why Do We Need an IEEE EMC Standard on Managing Functional Safety and Other Risks? IEEE EMC Mag 2016
- Why EMC Immunity Testing is Inadequate for Functional Safety
- Why increasing immunity test levels is not sufficient for high-reliability and critical equipment
- Test Resource
- The Safe Design of Electrical/Electronic Equipment (1 Day Course)
- The Safe Design of Electrical/Electronic Equipment (1.5 Day Course)
- The Safe Design of Electrical/Electronic Equipment (2 Day Course)
- Introduction to 'EM Engineering'
- Analogue circuit design for RF immunity
- EMI / EMC issues in an industrial automation system
- Assessing an Electromagnetic Environment
- On-site and In-situ EMC test methods
- The IET's Code of Practice on Electromagnetic Resilience first published February 2017
- 2-day Good EMC Engineering Practices for Equipment, Systems and Installations with legal requirements
- A Practical Guide for EN55022 and EN5011: Testing Conducted Emissions
- Adding Up Emissions
- Audio-frequency shield current induced noise is negligible
- Avoiding imbalance in differential transmission lines on Printed Circuit Boards (PCBs)
- Bonding cable shields at both ends to reduce noise
- Checklist of Good EM Engineering Practices
- Design Techniques for EMC Part 1: Circuit design, and choice of components
- EMC design of high-frequency power "switchers" and "choppers"
- EMC for Printed Circuit Boards – Basic and Advanced Design and Layout Techniques, Edition 2
- EMC systems & installations, 2000, Part 1 - Earthing
- EMC techniques in electronic design Part 1 - Circuit design and choice of components
- EMC testing: Part 1 - Radiated emissions
- Good EMC Engineering Practices for Fixed Installation
- IET Guide on EMC for Functional Safety Aug 2008
- Overview of Ts & Ms for EMC for FS, as published by IET August 2013
- Part 1, Good Design for SI, PI and EMC Saves Time and Cost
- Webinars on good SI, PI and EMC design techniques
- A Practical Guide for EN55022 and EN5011: Measuring Radiated Emissions
- Appliance Design, EMC for functional safety, marked-up Jan 9, 2010
- Bench testing individual PCBs for immunity
- Choosing and using filters
- Close-field Probing to reduce EMC design risks Part 1
- Cost-effective EMC Design by Working with the Laws of Physics
- Cost-Effective use of HDI PCB technology for SI, PI and EMC
- Design Techniques for EMC Part 2: Cables and Connectors
- EMC design of Switching Power Converters - Part 1
- EMC Design Techniques for electronic engineers
- EMC techniques in electronic design Part 2 - Cables and Connectors
- EMC testing: Part 2 - Conducted emissions
- EMC, systems & installations, 2000, Part 2, Installations
- Its EMC Jim but not as we know it, InCompliance magazine July 2015
- Keith Armstrong Biography
- Low-cost compliance with the EMC Directive
- Part 2, Segregation and Interface analysis
- Published Books
- Published books - Systems & Installations
- Webinars on using Simulation to help achieve cost-effective EMC
- A Practical Guide for EN 61000-3-2 - Limits for harmonic current emissions
- BOM cost, and profitability
- CE plus CE does not equal CE
- Close-field Probing to reduce EMC design risks Part 2
- Design Techniques for EMC Part 3: Filters and surge protection devices
- Designing I/Os so they will not suffer from 'ground loop' currents in cable screens (shiel
- EMC and Signal Integrity
- EMC design of Switching Power Converters - Parts 2 and 3
- EMC for Functional Safety, Medical Device Manufacturing, Business Briefing 2005
- EMC for Systems and Installations
- EMC techniques in electronic design Part 3 - Filtering and Suppressing Transients
- EMC testing: Part 3 - Fast transient burst, surge, electrostatic discharge
- EMC, systems & installations, 2000, Part 3, Equipment assembly
- Fixing EMC problems by applying good EMC design techniques
- 2-day Good EMC Engineering Practices for Equipment, Systems and Installations without legal requirements
- Improving the segregation/zoning good design technique for SI, PI and EMC
- Manager's introductory guide to EMC for Functional Safety, IET 2008
- Part 3, Reference Plane to Chassis RF-bonding
- Published Books
- Some useful references on EMC and EMI, 21 May 09
- A Practical Guide for EN 61000-3-3 and EN 61000-3-11 - Electromagnetic compatibility
- Bonding techniques for creating the RF Reference
- Complying With the EMC Directive Without 3rd Party Testing
- Cost-effective uses of close-field probing Pt 1
- Design Techniques for EMC Part 4: Shielding
- Doing SI, PI and EMC right first time
- EMC design of Switching Power Converters Part 4 - Design techniques for HF isolating transformers
- EMC for Functional Safety, What's New in Electronics, Australia, Jan 06
- EMC techniques in electronic design Part 4 - Shielding (screening)
- EMC testing: Part 4 - Radiated immunity
- EMC for Systems and Installations Part 4 Filtering and shielding
- Fundamentals of EMC Design: Our Products Are Trying To Help Us
- Managing functional safety risks caused by EMI needs more than immunity testing IEEE Dresden 2015
- Part 4, Planes for 0V (ground) and power
- PCB Design of Gb-s Differential Lines
- Shield current induced noise is negligible
- The EMCIA's position on PLT
- The Physical Basis of EMC
- 2004/108/EC Systems, Installations and Good Engineering Practices
- AES-X13 and Interference-Free Pro-Audio Systems
- Cost-effective uses of close-field probing Pt 2
- Custom-engineered equipment and EMC compliance
- Design Techniques for EMC Part 5: PCB design and layout
- Electronic BSE
- EMC design of Switching Power Converters Part 5 - Design techniques for LF (mains) rectifiers
- EMC techniques in electronic design Part 5 - Printed Circuit Board (PCB) Design and Layout
- EMC testing: Part 5 - Conducted immunity
- EMC, systems & installations, 2000, Part 5 - Lightning protection
- Handbook on EN 61000-4-2: Personnel Electrostatic Discharge (ESD)
- Introduction to EMC for Functional Safety, EMC Society of Australia
- Overview of Techniques and Measures for EMC for Functional Safety IET 2013
- Part 5a, Decoupling
- PCB Design of Gb-s Differential Lines, July 2006
- RSS paper at EMCTLA Jan 98, updated Jun 02
- Signal Integrity and EMC
- Terminating cable screens (shields)
- A Practical Guide for EN 61000-4-3: Immunity to radiated radio frequencies
- Absence of proof is not proof of absence
- Design Techniques for EMC Part 6: ESD, dips, flicker, dropouts, electromechanical switching
- EMC - good practice makes perfect
- EMC and the 17th edition
- EMC design of Switching Power Converters Part 6 - Design Techniques for HF output rectifiers
- EMC techniques in electronic design Part 6 - ESD, electromechanical devices, power factor correction
- EMC testing: Part 6 - Low-frequency magnetic fields; mains dips, dropouts, interruptions, sags
- EMC, systems & installations, 2000, Part 6 - CE plus CE does not = CE
- Part 5b, Decoupling continued
- PCB Layout Techniques for Low Cost EMC
- RSS method of adding up emissions
- The first practical techniques for achieving EMC for Functional Safety - EMC Journal 2013
- Challenges in Testing
- Complying with the EMC Directive, 2004/108/EC
- EMC design of Switching Power Converters Part 7 - Suppressing RF emissions from converter inputs
- How to Get the Resources You Need
- Good EMC design principles for panel & system builders
- Handbook on EN 61000-4-4: Electrical fast transients and the EN 61000-4-4 test method
- Part 6a, Matched Transmission Lines
- Using 'Procedural' Technical Files for compliance with the EMC Directive
- Suppressing ICs which have BGA packages or multiple DC power rails, 2013
- Understanding EMC Basics (a 3-part series)
- Complying with the EMC Directive, Conformity 2009 Annual Guide
- Design & mitigation techniques for EMC for Functional Safety
- EMC Design of Switch-Mode Power Converters (1-day course)
- EMC design of Switching Power Converters Parts 8 and 9 Suppressing emissions of voltage fluctuations
- switching power converters
- Handbook on EN 61000-4-5: Testing and measurement techniques - Surge immunity test
- Informing the Customer
- Part 6b, Matched Transmission Lines continued
- Suppressing ICs with BGA or multiple power rails 2014
- A Practical Guide for EN 61000-4-6: Test & Measurement techniques
- Electrical and Electronic Safety in Medical Devices
- EMC Design Techniques for Low-Frequency Analogue Circuits (0.5-day course)
- Good EMC Design Principles: cable routing
- Good EMC Engineering Practices in the Design and Construction of Industrial Cabinets
- Low level of complaints is not evidence of compliance
- Part 6c, Matched Transmission Lines continued
- A Practical Guide for EN 61000-4-8: Power-frequency magnetic field immunity test
- EM phenomena
- Good EMC Design Techniques - EM Mitigation and Zoning (Part 6)
- Mains Harmonics Guide
- Napoleonic project management
- Part 7, Routing, Layer stacking, Microvias
- A Practical Guide for EN 61000-4-11: Testing and measurement techniques
- EMC for Functional Safety - The Need for Independent Assessment
- Good EMC design techniques: EM mitigation and zoning (Part 1)
- Mains Power Quality Guide
- Part 8, Other miscellaneous issues
- The Law versus Reality
- A Practical Guide for EN 61000-4-13: Mains harmonics and interharmonics
- EMC for the Functional Safety of Automobiles
- Good EMC design techniques: EM mitigation and zoning (Part 2)
- Maxwell's Equations, Quantum Electrodynamics, and good installation practices for SI, PI and EMC
- The truth of Murphy's Law
- Complying with the EMC Directive
- EMC in Safety Cases
- Good EMC Design Techniques: EM Mitigation and Zoning (Part 3)
- Handbook on EN 61000-4-14: Mains Voltage Fluctuations
- Problems with the EMC requirements in BS7671
- When the going gets tough - smarter design wins
- A Practical Guide for EN 61000-4-16: Common-mode disturbances in the frequency range 0Hz to 150Hz
- EMC Testing to Achieve Functional Safety
- Good EMC practice helps reduce financial risks
- A Practical Guide for EN 61000-4-27: Immunity to three-phase unbalance
- EMC-Related Functional Safety
- Good RF bonding techniques for cabinets
- A Practical Guide for EN 61000-4-28: Power Frequency Variation
- EMC-Related Functional Safety (An Update)
- How to do Risk Assessment (Part 1)
- A Practical Guide for EN 61000-4-29: dc power supply voltage dips, short interruptions & variati
- EMC-Related Functional Safety of Electronically Controlled Equipment
- How to do Risk Assessment (Part 2)
- Complying with IEC/EN 61800-3 Good EMC Engineering Practices in the Installation of Power Drive Syst
- EMC-Related Functional Safety, ITEM Update
- How to do Risk Assessment (Part 3)
- Calibration and use of artificial mains networks and absorbing clamps
- Functional Safety requires much more than EMC testing
- How to do Risk Assessment (Part 4)
- Functional safety requires much more than EMC testing
- Purchasing for compliance and reduced financial risk
- Functional Safety requires much more than EMI testing (Part 1)
- Revisiting the new EMC rules
- Functional Safety requires much more than EMI testing (Part 2)
- RF bonding techniques
- Introducing the IEE's draft guidance document on EMC and functional safety
- RF filtering the mains
- Introduction to EMC for Functional Safety
- Risk Assessment is good safety engineering, and reduces financial risks
- Managing EMC for Functional Safety
- Shielding techniques for cabinets
- The IET's Guide on EMC for Functional Safety
- The IET's new Guide on EMC for Functional Safety
- The IET's new guide: EMC for Functional Safety
- A Practical Guide for EN 61000-4-6: Testing and measurement techniques
- The IET's new guide: EMC for Functional Safety - applying Risk Management to EMC
- The IET's new guide: EMC for Functional Safety - applying Risk Management to EMC
- The IET's New Guide: How to Do EMC to Achieve Functional Safety
- The Poor Quality of Functional Safety Engineering in the Automobile Industry
- Traditional Immunity Standards are Inadequate for Proving EMC for Functional Safety
- Tutorial on EMC for Functional Safety
- Why EMC Immunity Testing Is Inadequate For Functional Safety
- EMC techniques for PCBs book, overview & contents
- Webinars on EMgineering
- Suppressing emissions by using data scrambling and spread‐spectrum hardware design techniques
- Close-Field Probing Webinars
- Complying with the EMC Directive (2004/108/EC), Second Edition Guide
- Cost-effective EMC & PCB Design for Electronic Products (5-day course)
- Cost-effective EMC design for electronic products (3-day course)
- Electromagnetic Compatibility for Functional Safety
- EMC design of Switching Power Converters Parts 8 and 9 Suppressing emissions of voltage fluctuations
- EMC for functional safety
- EMC for Functional Safety - Regulations and Legislation
- EMC for Systems and Installations
- EMC mitigation techniques for Functional Safety
- EMC Techniques for Heatsinks
- EMC Testing for Functional Safety
- Good EMC Engineering for Fixed Installations
- Good EMC Engineering Practices in the Design and Construction of Fixed Installation
- Good SI, PI and EMC design techniques
- How to Manage the Functional Safety and other risks* that can be caused by Electromagnetic Disturbances, by applying IEEE 1848-2020 or IET 2017 (Half-day Course)
- Introduction to EMC for Functional Safety
- Managing Risks Due to EMI Needs More Than Immunity Testing
- PCB Design and Layout Techniques for cost-effective SI, PI and EMC, in 2015 (2-day course)
- PCB design and layout techniques for lowest-cost EMC compliance, and signal integrity
- Practical Electronic Design Techniques for Cost-Effective EMC w/o PCB design (2-day course)
- Simulators for SI, PI, EMC Can Minimize/Eliminate Design Iterations
- The First 500 'Banana Skins'
- The Physical Basis of EMC
- Using close - field probes to reduce design risks early in a project
-
Members Area
- GaN/SiC Transistors for Your Next Design - Fight or Flight?
- New Technology, a radiant future (for the EMC engineer
- Solar Storm Nearly Started a Nuclear War
-
Articles
- CE plus CE DOES not equal CE!
- Who's Afraid of the Big Bad RED?
- Essential PCB design/layout techniques for cost effective SI, PI and EMC
- A Low-Frequency Magnetic Field Test Procedure for Susceptible Instruments
- How to design cost-effective EMC filtering for electrical/electronic equipment
- Saving time and money with good EMC Design
- Quizzes
- On-line Training Webinars
- Video
-
News
- A round-up of EMC and Compliance International 2023
- Advanced PCB Course is available with a discount!
- An invitation to attend training in Helsinki!
- Andy Degraeve returns to EMC and CI 2023!
- Annual meeting of the IET Electromagnetics Professional Network at Newbury
- Bonus Session added for delegates!
- Countdown is ON!
- Discount code for EMC & CI 2024
- Discounted EMC and PCB Training!
- Dr. Min Zhang's latest blog: Validation of ESD Current Waveform Using an RF Current Probe
- EARLY BIRD PRICE - Ending Soon!
- EM Resilience Training Next week
- EM Resillience events at IEEE EMC+SIPI 2023
- EMC & Compliance International 2023 Registrations Open
- EMC and CI 2023 Show Preview
- EMC and CI Show Edition available to download now!
- EMC Aware - Issue 3 now available!
- EMC Aware is open for business!
- EMC Aware show guide calls for papers!
- EMC Training World Tour Continues!
- EMC World Tour Continues!
- EMC&CI 2024 Conference programme officially launched
- Especially Susceptible Frequencies
- Essential PCB Design/Layout Techniques: Final Part Now Available
- Everything you need to know about RF current probes: A Mini-Series by Dr Min Zhang
- Explore Recent Product Safety Enforcement Activities
- Free Design Checklist - help de-risk your project!
- FREE EMC Training!
- Free Guide - The Engineers Practical Guide to EMI Filters
- Free IEEE EMC Society Lecture
- Free Online EMC Self-Study Course: Your Gateway to In-Depth EMC Knowledge
- How to deal with EMI, when required to achieve Functional Safety
- IEEE EMC Society no longer supports iNARTE - August 2022
- IEEE EMC Society, UK and Northern Ireland Chapter, at Newbury
- Join Us for an Exclusive Power Electronics Workshop
- Keith's "The Physical Basis of SI, PI and EMC" now available for free download
- Keith's 75th Blog: Measuring the Fmax of Integrated Circuits
- Keith's 77th Blog: No tests are required for CE-marking to the EMCD
- Ken Wyatt providing training for EMC and CI 2024
- Latest Edition of EMC Aware Magazine - January 2024 Issue Out Now!
- Latest issue of EMC Aware has been published!
- Learn how to troubleshoot EMI like a pro!
- Live training Course Updates
- Live Training in Melbourne!
- Making Engineers Better Prepared for Dealing with EMC
- May 2024 Issue of EMC Aware Magazine Now Available Online
- New Show Organising Team
- One event to bind them all!
- PCB Design Training - October 10th and 11th
- Please support IEC Draft TS 60601-4-X before 17th January 2023
- Prominent EMC Expert Kenneth Wyatt's Training Course at EMC & Compliance International 2024
- Renowned Expert Kenneth Wyatt to deliver EMC and CI training session in person
- Stand space is filling fast!
- Training and Consultancy in Australia and New Zealand, February and March 2024
- Training Programme released - 20% discount until September!
- Training Sessions are now online!
- Training Workshop Quality!
- Want to know where to place Common Mode chokes on Inverter Drive cables?
- Live EMC training in 2023!
- 2022 IEEE International Symposium on EMC, Signal & Power Integrity
- 2023 'The Place to be for EMC'
- 80% for EMC and CI Delegates
- Are you 'EMC Aware'?
- Article in Signal Integrity Journal
- Delegate Spaces are selling fast!
- Discount Code!
- EMC and CI - Workshop Programme has been announced!
- EMCTLA Meeting scheduled for next week!
- Essential PCB design and layout course
- Event Prospectus has been published
- Ferrite Cores - Un-intended Consequences!
- Free IEEE EMC Event on 'The nuts and bolts of UKCA and UKNI marking'
- Interested in low cost EMC testing?
- Live Training is back!
- New EMC Course Available now!
- New EMC Course now streaming!
- Now on Kindle!
- Recent blog articles and online ticketing
- Subscription Service - one fee, ALL training!
- The EMC Academy has launched
- Tickets please!
- Training Workshop Update!
- TWEX
- TWEX Programme - updated
- 17 Speakers and over 1000 minutes of unique content!
- Do you want to ask an EMC expert a question??
- EMC Launches New Subscription Service!
- EMC Standards has been improved!
- EMC Tips for PCB Designers
- Essential PCB design and layout course
- Fast Circuits for Fast Cars!
- On-demand event extended until the 30th July
- Online training dates for your diary in November!
- Part 12 in the free serialization of my Essential PCB design/layout techniques course
- TWEXpert Line Up is confirmed for EMC & CI 2022
- What is this transmission line termination method called?
- 6th Installment of FREE printed circuit design course!
- 7th Instalment of FREE printed circuit design course!
- EMC Standards is now hosting historical EMC information
- Module Zero - Get it now with 70% off!
- Online registration is now open!
- Online training in May 2021!
- Part 10 of Essential PCB Design and Layout course
- Part 11 in the free serialization of my Essential PCB design/layout techniques course
- Part 9 of Essential PCB Design and Layout course
- Simulating the Electromagnetic Performance Characteristics of Large Electric Vehicle Batteries
- Speakers have been announced for EMCUK 2021
- Technical Workshop program for EMC & CI, 2021 has been released
- The 8th instalment in the serialization of the Essential PCB design/layout techniques for cost effective SI, PI and EMC.
- Trailer for Dai Davis's workshop on Brexit and UKCA marking
- Training Workshop Introduction
- What to do about BREXIT and UKCA marking?
- 5th Instalment of FREE design course has been published!
- Training Workshop - Sponsorship Opportunities
- EMC & Compliance International - New Date Announced!
- Essential PCB design/layout techniques for cost effective SI, PI and EMC
- Free Training
- Postponed until 2021! - Free evening presentation on the EMC of Wireless Power Transfer
- Postponed until 2021 - EMC Standards is very excited to announce its first exhibition!
- EMC Standards is a source of Continuous Professional Development (CPD)
- Learn how to avoid electromagnetic interactions that cause delays and increase costs.
- EMC Short Course in South Africa: 31 Oct - 6 Nov 2018
- How to design cost-effective EMC filtering for electrical/electronic equipment
- Keith Armstrong receives IEEE award
- New public training course - Belgium Feb 2019
- The latest 2019 updates from EMC Standards!
- Training course tackles EMI in all types of systems and installations
- Practical SI, PI and EMC design training
- Training course tackles EMI in fieldbusses
- Cranes can suffer dangerous EMI
- EMC expert releases new webinar
- EMC problems could lead to lost business
- EMC Education
- EMC Standards - New website for EMC Compliance help
- How well do you know EMC?
-
Blog
- A question on shielding with plain aluminium
- CISPR Emissions Limits are no use to System Integrators or Installers
- Exporting to the EU, and/or to the UK
- GaN/SiC for Your Next Design - Fight or Flight?
- Measuring the Fmax of Integrated Circuits
- No tests are required for CE-marking to the EMCD
- Place TVSs before, or after, EMI filters?
- Reducing Impedance: The Power of Flat Conductors
- Reducing the Ambient EM Noise for Benchtop EMI Troubleshooting
- Risk Assessment for EU and UK Compliance
- Validation of ESD Current Waveform Using an RF Current Probe
- We are all human!
- What is electricity, really?
- Where best to place CM chokes on VSD motor cables?
- Why Chat GPT, AI, and ML are so dangerous, has been known for decades
- Saving time and money with good EMC Design
- How to overcome challenges with EMC compliance
- Interesting Question about plastic enclosures and EMC
- Legal requirement for EM resilience for electronic products?
- A Capacitively Coupled Pin Injection Method - An Alternative Immunity Test to BCI
- A simple method for estimating radiated emissions
- A simple method for estimating radiated emissions - Part 2!
- Comparison of PWM VFDs versus Resonant Link Converters - Part 1
- Comparison of PWM VFDs versus Resonant Link Converters - Part 2
- Insertion Loss and Filter Performance
- A cable can be an effective Antenna, so you add Ferrite
- Both IEC 61000-6-4 and IEC 61800-3, Category 3 relate to Industrial use with supplies not connected to the public low voltage mains. The limits for 61800-3 Cat 3 are higher than those for 61000-6-4, so which should I use for my control panel?
- Constructing I/O panels for shielded rooms
- Happy Christmas from EMC Standards!
- What to do about BREXIT and UKCA marking
- 'Clean Earths' Aren't Clean! Or Earth!
- Calculating dB Uncertainty for a LISN
- Don't Rely on the Stability of the Mains Frequency
- EMC Confidence Checking
- EMC Good Practice Makes Perfect
- Functional Safety, Risk Management, EMC and EMI
- Getting Started with EMC
- Getting the Financial Resources We Need
- Guest Blog- The Future is Electric - Let us Safeguard it
- Skin Effect and Surface Currents
- SPCs and Safety
- The Whole Product Must be Tested
- There are no low frequency systems any more!
- We Can't Fully Test Digital Systems
- What Spacing Between LVDS Harnesses Running at Different Voltages?
- What's in a Name?
- EMC Question for 400Hz Power System
- ESD testing needs to change to reflect real-life
- Eulogy for Richard Marshall
- Ground / power bounce cause noise emissions from all IC pins
- Guest Article - EFT/B Immunity
- Guest Article - High frequency harmonics and marine power quality.
- How EMC is achieved in 199 words!
- Keith has several Tutorial presentations in the IEEE EMC Society's virtual international symposium in August 2020
- Mains harmonic current emissions are always bad - It is risky to rely on the limits or exclusions in the standards
- Never believe any certificates or declarations
- Risks associated with EMC and EMI - Don't get confused!
- Skunk Works' Operating Rules Shrug off excessive administration, do good stuff quicker, increase profits!
- Under the medical safety standard IEC 60601-1-2:2014 an EMC test lab is not required to assess or review any aspect of a Risk Management File.
- What is a 'TWEX'?
- A valuable automobile analogy for quick and cost-effective electronic design
- Become part of EMC Standards!
- Complying with all applicable standards is a minimum requirement!
- Digital systems can never be proved safe enough by testing
- EMC Standards partners to host exhibition!
- Free Course! Essential PCB Design and Layout
- Live training This March!
- Meet me in New Orleans at the IEEE EMC+SIPI Symposium, 22-26 July 2019
- More 'Live' training in 2019
- Guest Contributor section - New article added!
- One Plane to rule them all!
- Under the medical safety standard IEC 60601-1-2:2014 manufacturers must create EMC test plans - but EMC test labs should be careful not help them on matters of Essential Performance
- Upcoming training this July
- We don't do EMC for the sake of the CE marking
- 'Live' training in 2019
- 'Accidental antennas' and good Electromagnetic (EM) Design
- 'Re-spinning a design'
- Cable Shield Grounded At One End Only
- Complying with EU Safety Requirements
- Earth loops, ground loops, and hum loops
- Ensuring that products remain compliant with new versions of EU Directives and Harmonised Standards
- Good SI, PI and EMC require this most of all...
- How to Get the Financial Resources We Need
- Keith wins an award!
- Mains filters might not perform to spec, and can even amplify noise, in real life
- Moores Law, die shrinks, and cost-effective EMC
- Never use liquid threadlockers on any electrical fixings!
- PCB reliability problems due to the growth of CAF (Conductive Anodic Filaments)
- Saving time and money with good EMC design
- Shielding and filtering don't work independently of each other
- Updates
- Contact